|
GENERAL SCOPE
This is a low alloy steel containing nominally 0.3% C, 0.5% Cr, 0.2% Mo and
0.5% Ni. The alloy is widely used in oil patch applications for connectors,
hangers and block valves. Higher strength levels can be achieved by suitable
heat treatment but these are not NACE MR0175 approved.
The hardenability limitations of this grade (depth to which it will harden /
obtain the specified mechanical properties after heat treatment) must always
be taken into account when designing and selecting equipment.
To Buy This Product or Enquire
About Availability And Other Howco Group Services,
click here.
To View Full Product Data Sheets,
howcogroup.com membership is required.
Click Here To Apply.
|
